SoundSlumber🌙 The Ultimate Fusion of Comfort and Harmony

€35 €76


● DO NOT Expose Product Liquids or Moisture

● DO NOT Attempt to Tamper with Product By Dropping, Disassembling,

Opening or Scratching,etc

● DO NOT Store the Product Near Acidic or Alkaline Material

● Take Out the Headphones Before Washing
●Keep the Product Away From Fire

●Note: When not used for 3-6 months, you need to charge once.



●Could activate SIRIon iOS device for commands

●Built-in Microphone for Hands Free Talking

●Headphones are Removable for Headwear Washing

●Product is Rechargeable Through Universal Micro-USB Cable



●Wireless Version:V5.0

●Frequency:2.402 GHz-2.480 GHz

●Transmission Range:10M/33Ft

●Rated Power:RMS 10mW×2

●Speaker Unit:32Ω/30mm

●Battery:3.7V 180mAh Rechargeable Li-polymer Battery

●Standby Time: Over 120 Hours

●Play Time: Over 12 Hours

●Charge Time:2H

●With Over-Current, Overcharge & Overheat Circuit Protection Design on PCB



Pairing to Your Device

To pair to your phone or device for the first time hold down the play button  located on the control panel for 4 seconds until you see a red and blue flashing light. Open your settings on your phone or device. You will see the name "BT-01" in the list, select it and your device will be Connected.


If a password is requested please use the default:0000

Next time you switch on your product, it will be connectedautomatically.


Taking Calls

To take an incoming call press the Play/Pause button. If you are listening to music it will automatically stop. To end a call press the Play/Pause button. Double click the Play/Pause button will re-dial the last number.

Playing Music

Select your music as normal from your phone or device.

Use the buttons on yourcontrol panel to Play-Pause & Skip tracks.


Power On

Simply hold down the Play/Pause button for 4 seconds to turn On.


Power Off

Simply hold down the Play/Pause button for 4 seconds to turn off.


-Wireless Headphone will shut down if connection failed in 3 minutes.


-Double click button "+" to activate SIRI on iSO device


Charging Instructions

●Fully charge battery before fist use.

●Use the supplied USB cable, simply plug into the charging port of the headwear.

●Now plug the other end of the USB cable into your PC or laptop.

●During charging, the LED Status Light will turns to be red on thecontrol panel.

●When charging is completed, the red light will change to blue.

●Itwill take about one hour to get the battery full charged.

Buttons Interface

①Volume Downlong press/Previous Songshort press

②Play/Pause/Answer/Hang Off/Redial

Power On/Power Offlong press

Play/Pauseshort press

Answer/Hang Offshort press

Redialdouble click

③Volume Uplong press/Next Songshort press

④LED Status Light

-Long press Play/Pause button for 2 seconds to reject a incoming call.








Recently viewed